INSERTING INSERTION SHEETS IN BETWEEN TRANSPARENCY FILMS(TRANSPARENCY INSERTS)
Overview
When copying on transparency film, the sheets may stick together due to static electricity.
The transparency inserts function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the sheets easy to handle.
It is also possible to copy on insertion sheets.
The transparency inserts function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the sheets easy to handle.
It is also possible to copy on insertion sheets.
.jpg){kind=spacer}
When performing 2-sided copying, only "2-side to 1-side" mode can be used.
- The number of copies cannot be selected in this mode.
- Transparency film can only be placed in the bypass tray.
Operation
Place the transparency film face down in the bypass tray, and load transparency film sheets.
After loading the transparency film, configure the bypass tray settings.
Place the original and tap the [Preview] key.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
Tap the [Others] key, and tap the [Transparency Inserts] key. 
Tap the [On] key.
When making a copy on insertion sheets, tap the [Also Make Copy on Inserts] checkbox to set to 
.
After the settings are completed, tap
and [Back] keys in sequence.
.After the settings are completed, tap
and [Back] keys in sequence.
To cancel the transparency inserts setting:
Tap the [Off] key.
Check the preview image in the preview screen.
Check whether or not settings produce the required results.
To cancel all settings:Tap the [CA] key.
Tap the [Start] key to start copying.
When making only one set of copies, you do not need to specify the number of copies.
