COPYING A3 (11" x 17") ORIGINALS WITH NO EDGE CUT-OFF(A3 (12" X 18") FULL BLEED COPY)
Overview
This feature lets you copy an entire A3 (11" x 17") size original at full size with no image cut-off at the edges.
A3W (12" x 18") size paper is used, which is slightly larger than A3 (11" x 17") size.
The A3W (12" x 18") full bleed copy must be specified before scanning the original.
The staple and punch functions cannot be used.
Operation
Tap the [Others] key, and tap the [A3 (11 x 17) full bleed copy] key.
A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
After the settings are completed, tap the [Back] key.
To cancel A3W (12" x 18") full bleed copy setting:
Tap the [A3 (11 x 17) full bleed copy] key to uncheck it.
Tap the [A3 (11 x 17) full bleed copy] key to uncheck it.
Place A3W (12" x 18") paper into the bypass tray.
Pull out the extension guide, adjust it to the width of A3W (12" x 18") paper, and place the paper on the bypass tray.
After loading A3W (12" x 18") paper into the bypass tray, configure the bypass tray settings as explained in "MAKING COPIES USING THE BYPASS TRAY".
After loading A3W (12" x 18") paper into the bypass tray, configure the bypass tray settings as explained in "MAKING COPIES USING THE BYPASS TRAY".
Place the original and tap the [Preview] key.
Check the preview image in the preview screen.
Check whether or not settings produce the required results.
To cancel all settings:Tap the [CA] key.
Tap the [Start] key to start copying.
When making only one set of copies, you do not need to specify the number of copies.
