STAPLE SORT SETTING

Overview

This function staples sorted copies and delivers them to the tray.
Binding Edge Process image
OFF Does not staple.
1 staple in back
1 staple in front
2 Staples
Pamphlet Copy
You can view staple positions on the "PREVIEW SCREEN".
  • A finisher or saddle finisher is required to use the staple sort function.
  • A saddle finisher is required to use the saddle stitch function.

Operation

Staple ON (excluding pamphlet copy)
Tap the [Staple Sort] key.
Select a staple position(s).
After the settings are completed, tap .
  • To change the output tray, tap the [Output Tray] key, and select the output destination.
  • If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap the [Continue] or [Cancel] key.
    [Continue]: Continues sorting without stapling.
    [Cancel]: Cancels the staple sort setting.
Saddle stitch
Tap the [Staple Sort] key.
Select [Pamphlet Copy].
Configure binding edge and cover settings.
After the settings are completed, tap and check that the [Pamphlet Copy] key is enabled on the staple sort screen. After you have checked it, tap .
  • If [Pamphlet Copy] is already specified in [Others], you do not need configure binding edge and cover settings.
  • If [Pamphlet Copy] is specified in [Others], the saddle stitch screen appears. Confirm the message shown on the screen, and tap the [On] key.
  • To change the output tray, tap the [Output Tray] key, and select the output destination.
  • If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap the [Divide], [Continue] or [Cancel] key.
    [Divide]: Divides the pages into sets that can be stapled and sorts them. You cannot use this function if the cover settings are selected.
    [Continue]: Continues sorting without stapling.
    [Cancel]: Cancels the staple sort setting.
Back to top