DAYLIGHT SAVING TIME SETTING
This is the first and basic setting for operating the machine.
If [System Settings] in "Setting mode" → [Operation Settings] → [Disabling of Clock Adjustment] is enabled, the date and time cannot be set. Enable daylight saving time.
| Item | Description |
|---|---|
| Daylight Saving Time Setting | Select whether or not the Daylight Saving Time Setting is enabled. If disabled, the following settings will not be possible. |
| Select Setting Type | Specify whether the starting and ending day of daylight saving time are to be set using the day of the week or the date. |
| Start Time | Set the starting time of daylight saving time. Set the starting month. If you selected "Day of the Week" in "Select Setting Type", set the starting week of daylight saving time and then the starting day. If you selected "Date" in "Select Setting Type", set the starting date. Set the hour and minute and the UTC (Coordinated Universal Time) setting. |
| Completing Time | Set the ending time of daylight saving time in the same way as you set the starting time. |
| Adjustment Time | Set the time to be adjusted when daylight saving time begins. |
When this function is used, the time changes at the beginning and end of daylight saving time as indicated in the table below.
| Area | Standard time → Daylight saving time | Daylight saving time → Standard time |
|---|---|---|
| Europe* | Last Sunday in March, 1:00 to 2:00 AM | Last Sunday in October, 1:00 to 0:00 AM |
| Australia, New Zealand | Last Sunday in October, 2:00 to 3:00 AM | Last Sunday in March 3:00 to 2:00 AM |
| Other countries | Select the [Daylight Saving Time Setting] checkbox so that a checkmark _S.jpg){kind=icon} appears. The clock setting is configured to normal time plus one hour. When the is selected, clock returns to normal time. |
|
* In some countries, the starting and ending times of daylight saving time may be different than the times set in the machine.
Back to top