LIST OF SETTING MODE FOR FAX

Item	Factory default setting	U	A
System Settings		Yes	Yes
F-Code Memory Box	-	Yes	Yes
Fax Data Receive/Forward - Fax Functions		Yes	Yes
Fax Settings		Yes	Yes
Receive Settings	Auto Reception	Yes	Yes
Multiple Set Print	Disabled	Yes	Yes
Staple *1	Disabled	Yes	Yes
Forward Received Data	-	Yes	Yes
Image Send Settings - Fax Functions		No	Yes
Fax Settings		No	Yes
Fax Default Settings		No	Yes
Dial Mode Setting	Tone	No	Yes
Auto Wake Up Print	Enabled	No	Yes
Pause Time Setting	Varies depending on the machine configuration	No	Yes
Fax Dest. Confirmation Mode	Disabled	No	Yes
Apply to Addresses Other Than Fax	Disabled	No	Yes
Speaker Settings		No	Yes
Speaker	Volume: 5	No	Yes
Ringer Volume	Volume: 5	No	Yes
Line Monitor	Volume: 5	No	Yes
Fax Receive Complete Signal	Volume: 5; Tone Pattern: 3 Transmission Complete Sound Time Setting: 3 sec.	No	Yes
Fax Send Complete Signal	Volume: 5; Tone Pattern: 3 Transmission Complete Sound Time Setting: 3 sec.	No	Yes
Fax Communication Error Signal	Volume: 5; Tone Pattern: 3 Transmission Complete Sound Time Setting: 0.3 sec. each	No	Yes
Remote Reception Number Setting	5	No	Yes
Original Print on Transaction Report	Print Out Error Report Only	No	Yes
Transaction Report Print Select Setting		No	Yes
Single Sending	Print Out Error Report Only	No	Yes
Broadcasting	Print Out All Report	No	Yes
Receiving	Do not Print	No	Yes
Confidential Reception	Print Out Notice Page	No	Yes
Activity Report Print Select Setting		No	Yes
Auto Print at Memory Full	Disabled	No	Yes
Print Daily at Designated Time	Disabled	No	Yes
ECM	Enabled	No	Yes
Digital Subscriber Network	Disabled	No	Yes
DRD(Distinctive Ring Detection)	Disabled	No	Yes
Fax Send Settings		No	Yes
Auto Reduction Sending Setting	Enabled	No	Yes
Rotation Sending Setting	All Enabled	No	Yes
Quick On Line Sending	Enabled	No	Yes
Printing Page Number at Receiver	Enabled	No	Yes
Sender/Destination Name Change	Fax No.	No	Yes
Date/Own Number Print Position Setting	Outside the Original Image	No	Yes
Recall in Case of Line Busy	See "Country Differentiation Table"	No	Yes
Recall in Case of Communication Error	See "Country Differentiation Table"	No	Yes
Prohibit Fax Broadcasting	Disabled	No	Yes
Fax Receive Settings		No	Yes
Number of Calls in Auto Reception	2 times	No	Yes
Switching from Manual to Automatic Reception *2	Disabled	No	Yes
Duplex Reception Setting	Disabled	No	Yes
Auto Receive Reduce Setting	Enabled	No	Yes
Print Style Setting	Auto Size Select	No	Yes
Set the Telephone Number for Data Forwarding	-	No	Yes
Letter Size RX Reduce Print *2	Disabled	No	Yes
Receiving Date & Time Print	Disabled	No	Yes
A3 RX Reduce	Disabled	No	Yes
Fax Output Settings	Varies depending on the machine configuration	No	Yes
Number of Prints	1	No	Yes
Staple Settings*1	1 Staple at Back	No	Yes
Paper Size	A4 or A3 (8-1/2 x 11 or 8-1/2 x 11R)	No	Yes
Allow/Reject Number Setting		No	Yes
Allow/Reject Number Setting	All Disabled	No	Yes
Reject Unknown Calls	Disabled	No	Yes
Fax Polling Security		No	Yes
Set Fax Polling Security	Enabled	No	Yes

*1 When a saddle finisher or finisher is installed
*2 This function is not available in some countries and regions.