THE SCANNED IMAGE IS CLIPPED

If you are unable to solve a problem using the solutions in this manual, press the [Power] button and then turn the main power switch to the "

" position. Wait at least 10 seconds and then turn the main power switch to the "

" position. After the main power indicator colour changes to green, press the [POWER] button.

When the background colour of the job status display at the upper right corner of the touch panel is not grey, do not switch off the main power switch or unplug the power plug. This may damage the hard drive or cause the data being stored or received to be lost.

Point to check	Solution
Is the original scan size setting smaller than the actual original size?	Set the scan size to the actual original size. If you have intentionally set a smaller size than the actual original size, place the original considering the reference placement position for the selected scan size. For example, when scanning an A4 (8-1/2" x 11") original using a B5 (5-1/2" x 8-1/2") setting on the document glass, align the original using the document glass scale at the left edge to fit the area you wish to scan into the B5 (5-1/2" x 8-1/2") scanning area. - "DOCUMENT GLASS"

Point to check

Solution

Is the original scan size setting smaller than the actual original size?

Set the scan size to the actual original size.
If you have intentionally set a smaller size than the actual original size, place the original considering the reference placement position for the selected scan size. For example, when scanning an A4 (8-1/2" x 11") original using a B5 (5-1/2" x 8-1/2") setting on the document glass, align the original using the document glass scale at the left edge to fit the area you wish to scan into the B5 (5-1/2" x 8-1/2") scanning area.
- "DOCUMENT GLASS"